Refrigerant piping
Refrigerant piping is the set of copper pipes, insulation and flare connections that carry refrigerant between the indoor and outdoor units of an air conditioner. It forms the closed loop through which heat is moved out of a room.
Refrigerant piping is the pair of copper pipes that links the indoor unit (the wall-mounted or ceiling-cassette head inside a room) to the outdoor condensing unit on a balcony, rooftop or service yard. One pipe carries liquid refrigerant and the other carries low-pressure gas, and together they let the refrigerant cycle between the two units.
The copper tubes are sized to the system's capacity and run length, and they are usually wrapped in foam insulation to stop heat gain or condensation along the way. At each end, the pipes meet the unit through flare connections: the tube is expanded into a cone shape and tightened against a matching nut so the joint seals without solder. Pipe runs, insulation and flares are often bundled together with a drain hose and power cable.
Why it matters: the piping is a sealed circuit, so a poor flare, a kinked section or damaged insulation can cause refrigerant leaks, reduced cooling and wasted electricity. Singapore's humid climate makes insulation and joint quality more important, since uninsulated lines sweat and drip. When an aircon is installed or relocated, the piping work is where most of the long-term reliability is set.
In Singapore, refrigerant piping is handled during new installations, relocations and repairs of split-system units. Our aircon installation providers list firms that do this work.