Fan coil unit
A fan coil unit is the indoor component of a central or chilled water air conditioning system, containing a coil that cools or heats air and a blower that pushes it into the room. It is distinct from the outdoor condensing equipment that rejects heat.
A fan coil unit, often shortened to FCU, is the indoor part of an air conditioning system that does the actual cooling or heating of a room. It contains two main parts: an evaporator coil, which is a finned tube heat exchanger carrying chilled water or refrigerant, and a blower fan, which draws room air across the coil and pushes the conditioned air back out through a grille or diffuser.
In Singapore you will find fan coil units most often in offices, hotels, shopping malls, hospitals and older commercial buildings that run chilled water systems. In these setups, a chiller plant produces cold water, which is piped to each FCU. The unit has a control valve and a filter, and it can be mounted in a ceiling void, concealed above a false ceiling, or set against a wall. Fan coil units also appear in some split-type and multi-split arrangements, where refrigerant rather than water feeds the coil.
Why it matters: when a fan coil unit fails, the room gets little or no cooling even if the outdoor plant is running fine. Common faults sit in this indoor section, such as a clogged filter, a fan motor that has seized, a dirty coil that cuts airflow, a leaking drain pan, or a stuck control valve. Knowing that the FCU is the indoor half helps you tell which part of the system needs attention, since the chiller or condensing unit serves a different function.
Fan coil units are usually sized to a room or zone, and several units often share one water loop. That means a fault in one unit is usually local, while a fault in the water supply or plant affects every unit connected to it.
For a list of service providers covering this kind of work, see our aircon installation providers in Singapore.