BTU and cooling capacity
BTU (British Thermal Unit) per hour is a measure of how much heat an air conditioner can remove from a room in one hour. One kilowatt equals about 3,412 BTU per hour, and one horsepower of cooling is roughly 9,000 BTU per hour.
A BTU, short for British Thermal Unit, is a unit of heat energy. When people talk about cooling capacity, they usually mean BTU per hour (BTU/h), which is the amount of heat an air conditioner can pull out of a space in one hour. A unit rated at 9,000 BTU/h removes that much heat every hour under test conditions.
Cooling capacity is often shown in kilowatts (kW) instead. One kW equals about 3,412 BTU/h, so a 2.6 kW split unit is roughly 8,900 BTU/h. Air conditioners are also sold by horsepower (HP), where one HP of cooling is about 9,000 BTU/h. A "1 HP" wall-mounted unit and a 9,000 BTU/h unit are therefore the same size in practice, even though the labels differ.
The number matters because it sets how well a unit can handle the heat load of a room. A unit with too little capacity runs constantly and still leaves the room warm. A unit with far too much capacity cycles on and off, which can leave the air clammy and wastes energy. In Singapore's humid climate, the heat load depends on room size, ceiling height, window exposure, and how many people and appliances are running, so the BTU rating is one input among several rather than a simple match to floor area.
Cooling capacity is a rated figure, so it does not tell you how efficiently a unit runs. That is a separate question, covered by efficiency ratings. When you are comparing air conditioners or checking a technician's sizing recommendation, the BTU/h, kW, and HP figures should all convert to the same number.
For a list of installers who size and fit units in Singapore, see the aircon installation providers in this directory.
"