Thermostat
A thermostat is the control device that reads room temperature and tells an air conditioner when to run and when to stop. Its temperature sensor provides the reading that drives the on-off cycling of the compressor.
A thermostat is the control unit that compares the air temperature in a room against the setting you have chosen. When the room is warmer than the setpoint, it calls for cooling. When the room reaches the setpoint, it switches the system off or drops it to a lower output. In most Singapore homes and offices, the thermostat is either a wall-mounted controller on a split-type unit or a sensor built into the indoor unit's return air path.
The temperature sensor, often a small thermistor, is the part that does the measuring. It sends a resistance reading to the control board, and the board decides whether the compressor and fan should be running. This is what makes cycling possible: the compressor runs until the sensor reports the target temperature, then stops, then restarts when the room drifts back up. Each start and stop is one cycle.
Why it matters for repairs: a faulty sensor can make an aircon short-cycle, run constantly without reaching the setpoint, or shut off too early. Symptoms like these are often mistaken for a low refrigerant problem or a failing compressor, so a technician will usually check the thermostat and sensor readings before condensing a diagnosis. A sensor that reads the wrong temperature can also cause the coil to freeze if the unit keeps running when airflow is restricted.
If you need a technician to test or replace a thermostat or sensor, the aircon repair and troubleshooting providers listed in this directory cover this kind of diagnostic work.